Kains Manufacturers Pressure gauges with stainless steel case and brass wetted parts for cost sensitive market. SS brass pressure gauges can be used for Hydraulic systems, Power packs, Water, air and for the process medium which are no corrosive for brass measuring system.
|
General Specification |
|
|
Reference Standard |
EN – 837 / IS 3624-1987 / ASME |
|
Model |
G10 102 |
|
Application |
Process / Hydraulic pressure measurement |
|
Type |
Glycerine filled |
|
Nominal Diameter |
1 1/2” (40 mm)2” (50 mm) 2 1/2” (63 mm) 4” (100 mm) |
|
Case Material |
304 St.St. |
|
Bezel Material |
304 St.St. |
|
Bezel fitting |
Crimped / non-openable |
|
Stem/ Socket Material |
Brass |
|
Sensing Element |
Brass Bourdon tube |
|
Joint |
Soldering |
|
Movement |
Brass |
|
Pointer |
Black Aluminium - |
|
Dial |
White coated Aluminium |
|
Marking |
Black ‘or’ Black and red combination for dual scale |
|
Scale |
Single / Dual |
|
Standard Unit |
kg/cm2 with psi (All other standard engineering units are available on request) |
|
Mounting |
Please refer the mounting chart |
|
Thread |
1/8" / 1/4” / 3/8' NPT / BSPP / BSPT |
|
Window |
Polycarbonate / Acrylic / Toughened glass |
|
Available in |
Pressure / Compound / Vacuum |
|
Minimum Range |
0 to 0.6 kg/cm2 / bar |
|
Maximum range |
0 to 400 kg/cm2 / bar |
|
Over Pressure |
130% FS Short time |
|
Case filling liquid |
Glycerine / non-conductive fluid for Electric contact |
|
Accuracy |
+/- 1.6% ‘or’ 2% of FSD |
|
Additional Fitment |
Optional* |
|
Calibration Certificate |
Factory calibration certificate shall be provided |
|
Material TC |
Shall be provided on request |