Commercial quality pressure gauges are the lowest priced pressure measuring instruments because of its construction. It is used widely for general industrial utility area and non-corrosive environment. G01 011 gauges are instrumented with MS colour coated case and bezel.
General Specification |
|
Reference Standard |
EN – 837 / IS 3624-1987 / ASME |
Model |
G01 011 |
Application |
Air/ water/ oil / general utility |
Type |
Utility |
Nominal Diameter |
1 1/2" (40 mm) 2” (50 mm) 2 1/2” (63 mm) 4” (100 mm) 6" (150 mm) |
Case Material |
M S colour coated |
Bezel Material |
M S colour coated / NA |
Bezel fitting |
Pressed fit / NA |
Stem/ Socket Material |
Brass. |
Sensing Element |
Brass |
Joint |
Soldering |
Movement |
Brass |
Pointer |
Black Aluminium - |
Dial |
White coated Aluminium |
Marking |
Black ‘or’ Black and red combination for dual scale |
Scale |
Single / Dual |
Standard Unit |
kg/cm2 with psi (All other standard engineering units are available on request) |
Mounting |
Please refer the mounting chart |
Thread |
1/8" / 1/4” / 3/8” NPT / BSPP / BSPT |
Window |
Glass |
Available in |
Pressure / Compound / Vacuum* |
Pressure Ranges |
Vacuum, 0-1up to 400 kg/cm2 / bar |
Over Pressure |
125% FS Short time |
Case filling liquid |
N A |
Accuracy |
+/- 2% / 3 % of FSD |
Additional Fitment |
Optional* |
Calibration Certificate |
Factory calibration certificate shall be provided |
Material TC |
Shall be provided on request |
Additional Fitment Accessories |
|
Snubber/ Dampner |
Isolation Valve / needle valve |
Siphon |
Gauge saver/ Over Pressure protector |
Gauge cock |
Cooling tower |
Siphon with gauge cock |
|